User's Guide

1 Select the channel with the active group alias or ID.
See Selecting a Call Type on page 96
.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends.
6.2.6.1.2
Making a Private Call
While you can receive and/or respond to a Private Call
initiated by an authorized individual radio, your radio must
be programmed for you to initiate a Private Call.
You will hear a negative indicator tone, when you make a
Private Call using the One Touch Access button, if this
feature is not enabled.
Use the Quick Text Message or Call Alert features to
contact an individual radio. See Text Messaging on page
77 or Call Alert Operation on page
110 for more
information.
1 Do one of the following.
• Select the channel with the active subscriber
alias or ID. See Selecting a Call Type on page
96.
• Press the programmed One Touch Access
button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
English
100