User's Guide

Volume Control, and Channel Selector buttons or knobs
only. A tone sounds for every invalid input.
During channel access, press to dismiss the call
attempt. A tone sounds.
NOTICE:
The access or deaccess code cannot be more than
10 characters.
Check with your dealer or system administrator for
more information.
7.5.5.1
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Do one of the following:
• Press the programmed Phone button to enter
into the Phone Entry list.
• Press the programmed One Touch Access
button.
Proceed to Step 3.
2
Press or to the required alias or ID. Press
to select.
When you press the PTT button while on the Phone
Contacts screen:
• A negative indicator tone sounds.
• The display shows Press OK to Place Phone
Call.
The display shows Access Code:
if the access code
was not preconfigured.
3
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
4 Press the PTT button to make the call.
The green LED lights up. The display shows the
Phone Call icon at the top right corner. The first text
line shows the subscriber alias. The second text line
shows the call status.
If the call is successful:
• The DTMF Tone sounds.
English
414