User's Guide

Programmed Number Keys
This method is used for Group, Private, and All Calls
only with a keypad microphone.
NOTICE:
You can only have one alias or ID assigned to a
number key, but you can have more than one
number key associated to an alias or ID. All the
number keys on a keypad microphone can be
assigned. See Assigning Entries to
Programmable Number Keys on page 471 for
more information.
Programmed One Touch Access Button
This method is used for Group, Private, and Phone
Calls only.
You can only have one ID assigned to a One Touch
Access button with a short or long programmable
button press. Your radio can have multiple One Touch
Access buttons programmed.
Programmable Button
This method is used for Phone Calls only.
7.5.1
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
7.5.1.1
Making Group Calls
Follow the procedure to make Group Calls on your radio.
1 Do one of the following:
•
Select a channel with the active group alias or ID.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Group Call icon and the group call alias.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
English
401