User's Guide

6.3.1.2
Setting a New Home Channel
When the Home Channel Reminder occurs, you can set a
new home channel by performing one of the following
actions:
• Press the Reset Home Channel programmable
button.
The first line of the display shows the channel alias
and the second line shows New Home Ch.
• Set a new home channel via the menu:
a.
Press
to access the menu.
b. Press or to Utilities and press to
select.
c. Press or to Radio Settings and press
to select.
d. Press or to Home Channel and press
to select.
e. Select from the list of valid channels.
The display shows beside the selected home
channel alias.
6.3.2
Auto Fallback
Auto Fallback is a system feature that allows you to
continue to make and receive non-emergency calls on the
selected Group Contact, if certain types of failures occur in
the Connect Plus system.
If one of these failures occurs, your radio attempts to roam
to a different Connect Plus site. This search process may
result in your radio finding an operable Connect Plus site,
or it may result in your radio finding a Fallback Channel (if
your radio is enabled for Auto Fallback).
A Fallback Channel is a repeater that is normally part of an
operable Connect Plus site, but cannot communicate with
either the site controller or Connect Plus network at that
moment. In Fallback mode, the repeater operates as a
single digital repeater. Auto Fallback Mode supports non-
emergency Group Calls only. No other call types are
supported in Fallback Mode.
English
267