User's Guide

2
Press or to Phone and press to select.
3
Press to select Manual Dial.
The first line of the display shows Number, the
second line of the display shows a blinking cursor.
4 Use the keypad to enter a telephone number, and
press to place a call to the entered number.
Press
to delete any unwanted characters. Press
followed by within 2 seconds to insert a
pause. The P replaces * and #
on the display.
If successful, the first line of the display shows
Phone Call. The second line of the display shows
the dialed telephone number.
If an invalid telephone number is selected, the
display shows a negative mini notice, Phone Call
Failed, Resource Not Available, or Invalid
Permissions.
If
is pressed with no telephone number entered,
the radio sounds a positive indicator tone then a
negative indicator tone. The display remains the
same.
5
Long press to end the call.
The first line of the display shows Ending. The
second line of the display shows Phone Call....
The display shows Phone Call Ended.
6.2.6.5
Making an Outbound Private Phone
Call from Contacts
NOTICE:
If the Phone Manual Dial is disabled in MOTOTRBO
Connect Plus Option Board CPS, the Phone
Number item will not be displayed in the Menu.
1
Press to access the menu.
English
262