User's Guide

2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call icon
appears in the top right corner. The first text line
shows the group call alias.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green, the radio unmutes and the response sounds
through the radio speaker. You see the Group Call
icon, the group alias or ID, and transmitting radio
alias or ID on your display.
If there is no voice activity for a predetermined
period of time, the call ends.
Radio returns to the
screen you were on prior to initiating the call.
6.2.6.1.2
Making a Private Call
While you can receive and/or respond to a Private Call
initiated by an authorized individual radio, your radio must
be programmed for you to initiate a Private Call.
You will hear a negative indicator tone, when you make a
Private Call using the Contacts list, Call Log, One Touch
Access button, or the Channel Selector Knob,
if this
feature is not enabled.
Use the Text Message or Call Alert features to contact an
individual radio. See Text Messaging on page 169 or Call
Alert Operation on page 289 for more information.
1 Do one of the following.
• Select the channel with the active subscriber
alias or ID. See Selecting a Call Type on page
251.
• Press the programmed One Touch Access
button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
English
257