User's Guide

Table Of Contents

Radio Control Steps

or Press or and scroll to

the required zone.

Press to select.

The display shows <Zone> Selected momentarily

and returns to the selected zone screen.

6.2.3

Using Multiple Networks

If your radio has been programmed to use multiple Connect

Plus networks, you can select a different network by

switching to the Connect Plus zone that is assigned to the

desired network. These network-to-zone assignments are

configured by your dealer through radio programming.

6.2.4

Selecting a Call Type

Use the Channel Selector Knob to select a call type. This

can be a Group Call, Multi-group Call, Site All Call or

Private Call, depending on how your radio is programmed.

If you change the Channel Selector Knob to a different

position (that has a call type assigned to it), this causes the

radio to re-register with the Connect Plus site. The radio

registers with the Registration Group ID that has been

programmed for the new Channel Selector Knob position

call type.

If you select a position that has no call type assigned to it,

your radio sounds a continuous tone

and the display shows

Unprogrammed. Your radio does not operate when selected

to an unprogrammed channel, use the Channel Selector

Knob to select a programmed channel instead.

Once the required zone is displayed (if you have

multiple zones in your radio), turn the programmed

Channel Selector Knob to select the call type.

English

251