User's Guide
Wait for 15 minutes and then repeat the steps in
Accessing the Radio by Using Password on page
59 to
access the radio.
Auto-Range Transponder System
The Auto-Range Transponder System (ARTS) is an
analog-only feature designed to inform you when your radio
is out-of-range of other ARTS-equipped radios.
ARTS-equipped radios transmit or receive signals
periodically to confirm that they are within range of each
other.
Your radio provides indications of states as follows:
First-Time Alert
A tone sounds.
ARTS-in-Range Alert
A tone sounds, if programmed.
ARTS-Out-of-Range Alert
A tone sounds. The red LED rapidly blinks.
NOTICE:
Check with your dealer or system administrator for
more information.
Over-the-Air Programming
Your dealer can remotely update your radio through Over-
the-Air Programming (OTAP) without any physical
connection. Additionally, some settings can also be
configured by using OTAP.
When your radio undergoes OTAP, the green LED blinks.
When your radio receives high volume data:
• The channel becomes busy.
•
A negative tone sounds if you press the PTT button.
NOTICE:
Once the programming is complete, a tone sounds,
and your radio restarts (powers off and on again).
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
English
61