User's Guide
Talkaround
This feature allows you to continue communicating when
your repeater is non-operational, or when your radio is out
of range from the repeater but within the talk range of other
radios.
The talkaround setting is retained even after powering
down.
Toggling Between Repeater and
Talkaround Modes
Follow the procedure to toggle between Repeater and
Talkaround modes on your radio.
Press the programmed Repeater/Talkaround
button.
One of the following tones sounds:
Positive Indicator Tone
Radio is in talkaround mode.
Negative Indicator Tone
Radio is in repeater mode.
Monitor Feature
The feature allows you to ensure that a channel is free
before transmitting.
Monitoring Channels
Follow the procedure to monitor channels.
1 Long press the programmed Monitor button.
If the channel is in use:
• You hear radio activity or total silence.
•
The yellow LED lights up.
If the monitored channel is free, you hear a “white
noise".
2 Press the PTT button to talk. Release the PTT
button to listen.
Permanent Monitor
The Permanent Monitor feature is used to continuously
monitor a selected channel for activity.
English
45