User's Guide
Attaching the Universal Connector
Cover
The universal connector is located on the antenna side of
the radio. It is used to connect MOTOTRBO accessories to
the radio.
Replace the universal connector cover or dust cover when
the universal connector is not in use.
1 Insert the slanted end of the cover into the slots
above the universal connector.
2 Press downwards on the cover to seat the dust
cover properly on the universal connector.
1
2
3
3 Secure the dust cover to the radio by pushing the
latch upwards.
Attaching the Accessory Connector
The accessory connector is to be secured to the universal
connector on the antenna side of the radio. Follow the
procedure to attach the accessory connector to your radio.
1 Insert the slanted end into the slots above the
universal connector.
2 Push connector upward.
3 Press downwards on the accessory connector until
you hear a click.
English
20