User's Guide

3 Press the PTT button to make the call.
The green LED lights up. The display shows
Broadcast Call
, the Group Call icon and alias.The
display shows the Group Call icon and alias.
4 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
NOTICE:
Users on the channel cannot respond to
Broadcast Voice Calls.
The radio returns to the previous menu after the call ends.
Receiving Broadcast Voice Calls
When you receive a Broadcast Voice Call:
• A tone sounds.
• The green LED blinks.
• The display shows the caller ID information in the top
right corner.
• The first text line shows the Group Call icon and
Broadcast Call.
• Your radio unmutes and the incoming call sounds
through the speaker.
When the call ends, the radio returns to the previous
screen.
A Broadcast Voice Call does not wait for a predetermined
period before ending.
You cannot respond to a Broadcast Voice Call.
NOTICE:
The radio stops receiving the Broadcast Voice Call if
you switch to a different channel while receiving the
call. You cannot continue with any menu navigation
or editing until the end of the Broadcast Voice Call.
Unaddressed Calls
An Unaddressed Call is a group call to one of the 16
predefined group IDs.
This feature is configured using CPS-RM. A contact for one
of the predefined IDs is required to initiate and/or receive
an Unaddressed Call. Check with your dealer or system
administrator for more information.
English
47