User's Guide

Table Of Contents
Reinitiating Emergency Mode
Perform one of the following actions:
Change the channel while the radio is in
Emergency mode. The radio exits the Emergency
mode, and reinitiates Emergency, if Emergency
Alarm is enabled on the new channel.
Press the programmed Emergency On button
during an Emergency initiation or transmission
state. The radio exits this state, and reinitiates
Emergency.
Exiting Emergency Mode After Sending
the Emergency Alarm
This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when:
An acknowledgment is received (for Emergency Alarm
only).
All retries to send the alarm have been exhausted.
NOTICE:
If your radio is powered off, it exits the Emergency
mode. The radio does not reinitiate the Emergency
mode automatically when it is turned on again.
Follow the procedure to exit Emergency mode on your
radio.
Do one of the following:
Press the programmed
Emergency Off button.
Change the channel to a new channel that has no
emergency system configured.
The display shows No Emergency.
Text Messaging
Your radio is able to receive data, for example a text
message, from another radio or a text message application.
There are two types of text messages, Digital Mobile Radio
(DMR) Short Text Message and text message. The
maximum length of a DMR Short Text Message is 23
characters. The maximum length of a text message is 280
characters, including the subject line. The subject line only
appears when you receive messages from e-mail
applications.
English
88