User's Guide

NOTICE:
When you configure Receive Group Message In
Scan, your radio is able to receive group messages
from non-home channels. Your radio is able to reply
the group messages on home channel but is not
able to reply on non-home channels. Check with
your dealer or system administrator for more
information.
Turning Scan On or Off
Follow the procedure to turn scan on or off on your radio.
1 Turn the Channel Selector Knob to select a
channel programmed with a scan list.
2
Press to access the menu.
3
Press or to Scan. Press to select.
4
Press or to Scan State. Press to
select.
5
Press or to the required scan state and
press to select.
If scan is enabled:
• The display shows Scan On
and Scan icon.
• The yellow LED blinks.
If scan is disabled:
• The display shows Scan Off.
• The Scan icon disappears.
• The LED turns off.
Responding to Transmissions During
Scanning
During scanning, your radio stops on a channel or group
where activity is detected. The radio stays on that channel
for a programmed duration known as hang time. Follow the
procedure to respond to transmissions during scanning.
1
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
English
66