User's Guide

• Edit the previously dialed ID, and press to
proceed.
6
Press or to Remote Mon..
7
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green LED
lights up.
8 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
•
The display shows a positive mini notice.
• The audio from the monitored radio starts playing
for a programmed duration, and the display
shows Rem. Monitor. Once the timer expires, an
alert tone sounds, and the LED turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
Radio Check
This feature allows you to determine if another radio is
active in a system without disturbing the radio user. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
Your radio must be programmed to allow you to use this
feature.
Sending Radio Checks
Follow the procedure to send radio checks on your radio.
1 Press the programmed Radio Check button.
2
Press or to the required alias or ID.
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress.The green LED
lights up.
English
61