User's Guide

Both your radio and the target radio must be programmed
to allow you to use this feature.
This feature stops after a programmed duration or when
there is any user operation on the target radio.
Initiating Remote Monitor
Follow the procedure to initiate Remote Monitor on your
radio.
1 Press the programmed Remote Monitor button.
2
Press or to the required alias or ID.
3
Press to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green LED
lights up.
4 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
•
The display shows a positive mini notice.
• The audio from the monitored radio starts playing
for a programmed duration, and the display
shows Rem. Monitor. Once the timer expires, an
alert tone sounds, and the LED turns off.
If unsuccessful:
• A negative indicator tone sounds.
•
The display shows a negative mini notice.
Initiating Remote Monitor by Using the
Contacts List
Follow the procedure to initiate Remote Monitor on your
radio by using the Contacts list.
1
Press to access the menu.
2
Press or to Contacts. Press to
select.
3
Press or to the required alias or ID.
Press
to select.
English
59