User's Guide

1 Press the programmed Transmit Interrupt Remote
Dekey button.
The display shows Remote Dekey.
2 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows Remote Dekey Failed.
If an interruptible call is stopped via this feature:
• The display shows Call Interrupted.
• A negative indicator tone sounds on the
interrupted radio until the PTT button is released.
NOTICE:
Check with your dealer or system administrator for
more information.
Broadcast Voice Calls
A Broadcast Voice Call is a one-way voice call from any
user to an entire talkgroup.
The Broadcast Voice Call feature allows only the call
initiating user to transmit to the talkgroup, while the
recipients of the call cannot respond (no Call Hang Time).
Your radio must be programmed to allow you to use this
feature. Check with your dealer or system administrator for
more information.
Making Broadcast Voice Calls
Program your radio to make Broadcast Voice Calls.
1 Select a channel with the active group alias or ID.
2 Do one of the following:
• Select a channel with the active group alias or ID.
•
Press the programmed One Touch Access
button.
English
45