User's Guide

• The channel becomes busy.
• A negative tone sounds if you press the PTT
button.
When OTAP completes, depending on the configuration:
• A tone sounds. The display shows Updating
Restarting. Your radio restarts by powering off and on
again.
• You can select Restart Now or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
• If unsuccessful, the display shows Sw Update Failed.
See Checking Software Update Information on page 122
for the updated software version.
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTICE:
This feature is applicable to XPR 3500e
only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTICE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.
The programmed Wi-Fi On or Off button is assigned by
default. Check with your dealer or system administrator to
determine how your radio has been programmed.
Voice Announcements for the programmed Wi-Fi On or
Off button can be customized through CPS according to
user requirements. Check with your dealer or system
administrator for more information.
English
100