User's Guide

Table Of Contents
Configuring Vibrate Style
NOTICE:
The programmed Vibrate Style button is assigned
by your dealer or system administrator. Check with
your dealer or system administrator to determine
how your radio has been programmed.
Vibrate Style is enabled when the Vibrating Belt Clip is
attached to the radio with a battery that supports the vibrate
feature.
You can configure the vibrate style by performing the
following action.
Press the programmed Vibrate Style
button to
toggle to short, medium, or long option and the radio
vibrates accordingly. Voice Announcement or Text-
to-Speech sounds Vibrate Style.
Alarm Tone Volume Escalation
Your radio can be programmed by your dealer to
continually alert you when a radio call remains
unanswered.
This is done by automatically increasing the alarm tone
volume over time. This feature is known as Escalert.
Call Alert Operation
Call Alert paging enables you to alert a specific radio user
to call you back.
This feature is accessible using a programmed One Touch
Access button.
Responding to Call Alerts
When you receive a Call Alert:
A repetitive tone sounds.
The yellow LED blinks.
Press the PTT button within 4 seconds of receiving a
Call Alert page to respond with a Private Call.
Making Call Alerts
Follow the procedure to make Call Alerts on your radio.
1 Press the programmed One Touch Access button.
The green LED lights up.
English
49