Quick Reference Guide

Not applicable
LED Indicators for Operational and Charging Status
LED
Indication
Solid green
Blinking
green
Solid red
Blinking
red
Blinking Amber
Fully charged
Rapid charge
Faulty battery
Not applicable
Charging
Status
Operational Status
Is transmitting;
Radio is powering on
Incoming call;
During call hang-time
Not applicable
Out of Service
Scan is enabled
Blinking Green
and Amber
Not applicable
No Indication
Not applicable
In Do Not Disturb Mode
Radio powered off;
Radio is idle; Radio kill
www.motorolasolutions.com www.motorolasolutions.com
1
2
4
3
14
15
5
9
10
11
12
13
6
7
8
2
3
1
1
2
SLN 1000
QUICK REFERENCE GUIDE
Controls and Indicators
Getting Started
Battery Capacity Information
Icon
Description
80%–100% capacity
60%–80% capacity
25%–60% capacity
5%–25% capacity
Less than 5% capacity
On/Off/Info Button
High-Output Speaker
Menu/Contact List Button
GPS/Wi-Fi
LED Display
Audio Accessory Port
USB Port
LTE Antenna
Charging Contacts
Volume Button
Push-to-Talk (PTT) Button
Battery Cover
Attaching and Removing the Antenna
1. Turn the radio off.
2. Align the bottom part of the antenna to the threaded base on top of the radio.
3. a. To attach the antenna, turn clockwise until snug. Do not force.
b. To remove the antenna, turn counterclockwise.
Microphone
Talkgroup/Contact List Scroll
Rocker
LED Status Indicator
Attaching the Battery
1. Align the battery contacts with the contacts inside the battery compartment. Insert
the contact side of the battery. Push the battery in gently.
1. Lift up the SIM card slot cover.
2. With the contacts facing down, align the card notched end first and slide the SIM
card into the slot.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Looking After The Radio
Never leave the radio or battery in extreme temperatures (over +60 °C/140 °F),
for example, behind a windscreen in direct sunlight.
The radio is not submersible.
To clean the radio, use a moistened or antistatic cloth.
LED Indication
Solid green
Voice
Announcement
Battery high
Battery medium
Battery medium
Battery low
Battery critically low
Solid amber
Solid amber
Blinking red
Blinking red
2. Insert the bottom tabs of the battery cover into the slot. Press down the top part
followed by the middle part of the battery cover.
3. Slide the latch into lock position.
Inserting the SIM Card