User's Guide

If… Then…
c Perform one of the following actions:
• Trunking – Wait for the Talk Permit
tone, then speak into the microphone.
• Conventional – Speak into the micro-
phone.
d To listen, release the PTT button to.
NOTICE: You cannot transmit lon-
ger than the preset Time-Out Tim-
er setting. If you attempt to do so,
the radio automatically stops your
transmission, and you hear a neg-
ative tone.
Call Alert Page
a From the Home screen, tap Con-
tacts.
b Tap FAB → Dialer.
c Enter the required number.
d Tap More → Page.
e Tap Page.
Private Call or Selective Call
a From the Home screen, tap Con-
tacts.
b Tap FAB → Dialer.
c Enter the required number.
d Tap More → Private Call.
e To start the call, press the PTT button.
f To end the call, tap End.
NOTICE: If Enhanced Private Call
is enabled and there is no answer
from the target radio, press the
PTT button to send a Call Alert
Page.
Dual Tone Multi-Frequency (DTMF)
Transmission
Perform one of the following actions:
If Hot Keypad mode enabled:
a From the Menu Feature Launcher, tap
Dialer → More → DTMF.
MN005642A01-AG
Chapter 11: Types of Radio Calls
40