User's Guide

If… Then…

a From the Home screen, tap the Radio Control Widget.

b Perform one of the following actions:

a On the Channel tab, select the required channel.

b On the Recents tab, select the recently used zone and

channel.

c To search for the required channel, tap Search.

7.5.1

Channel Error Messages

If there is a channel error, your radio displays error messages on the Radio Control Widget.

Type Description

Unprogrammed The mode is set to an unprogrammed channel.

Fail 001 The selected channel is assigned to an incorrect frequency band.

7.6

Managing Mode Select Menus

The Mode Select feature allows you to save the current zone and channel on your radio to one of the

five Mode Select feature menus in the Menu Feature Launcher screen. After that, the menus on the

Home screen function as shortcuts to the saved zone and channel.

Prerequisites: Navigate to the zone and channel that you want to save.

Procedure:

1 From the Home screen, tap

More.

2 Perform one of the following actions:

• To save the current zone and channel to one of the Mode Select menus, tap and hold the

desired Mode Select menu.

• To change to the preset zone and channel of the Mode Select menu, tap the Mode Select

menu.

7.7

Toggling the Controls and Buttons Tones On and Off

Procedure:

1 From the Home screen, tap More.

2 To toggle the controls and buttons tones on and off, tap Tones.

MN005642A01-AG

Chapter 7: General Radio Operation