User's Guide

Chapter 7
General Radio Operation
This chapter explains the general operations of your radio.
7.1
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group sequence specified in the scan list for the current channel/group.
Your radio supports different types of Scan Lists:
• Conventional Scan List
• Multi-System Talkgroup Scan
• Trunking Priority Monitor Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be preprogrammed in
your radio.
7.1.1
Managing the Scan List
Procedure:
1 From the Home screen, tap Scan List.
2 Tap Scan List or Channels.
3 Tap the required channel and perform one of the following options:
• To assign Priority-One status to the channel, select Priority 1.
• To assign Priority-Two status to the channel, select Priority 2.
• To remove priority from this channel, select No Priority.
• To remove the channel from the scan list, select Remove from Scan.
• To add the channel to the scan list, from the Channels tab, select Add to Scan List.
7.2
Scan
This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of
channels. Scanning is halted if you initiate a call and resumes when the call has ended.
7.2.1
Toggling the Scan Feature On and Off
Procedure:
Perform one of the following actions:
MN005642A01-AG
General Radio Operation
31