User's Guide

Preparing Your Radio For
Use
This section provides simple instructions to prepare your
radio for use.
Installing the Battery
NOTICE:
User is notified if radio detects non-Motorola
Solutions battery upon powering up, charging, or
removing from the charger. This feature is
applicable for IMPRES and Non-IMPRES battery.
When the radio is attached with the non-Motorola
Solutions battery, a tone sounds, display shows
Unknown Battry temporarily and battery indicator
is not shown in the radio display. Battery menu
screen displays Unknown Battry permanently and
IMPRES battery information is not shown on the
radio display.
• Attaching the battery.
a. Align the battery with bottom rails on the back of
the radio and slide the battery into the radio
frame until the side latches click into place.
• Removing the battery.
a. Press the latches on both sides.
b.
Pull the battery away from the radio.
English
12