User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 Advanced Call Features
- 6.2 Scan Lists
- 6.3 Scan
- 6.4 Call Alert Paging
- 6.5 Emergency Operation
- 6.5.1 Special Considerations for Emergency Operation
- 6.5.2 Emergency Keep-Alive
- 6.5.3 Exiting Emergency Operation
- 6.5.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.5.5 Sending an Emergency Alarm
- 6.5.6 Sending an Emergency Call (Trunking Only)
- 6.5.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.5.8 Sending an Emergency Alarm with Emergency Call
- 6.5.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.5.10 Sending a Silent Emergency Alarm
- 6.5.11 Emergency Find Me
- 6.6 Fireground
- 6.7 Tactical Public Safety (Conventional Only)
- 6.8 Man Down
- 6.9 Secure Operations
- 6.10 Radio Inhibit
- 6.11 Global Positioning System/Global Navigation Satellite System
- 6.12 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.13 Trunking System Controls
- 6.14 Mission Critical Wireless Bluetooth®
- 6.14.1 Turning On Bluetooth
- 6.14.2 Turning Off the Bluetooth
- 6.14.3 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature
- 6.14.4 Standard Pairing Feature
- 6.14.5 Turning On the Bluetooth Audio
- 6.14.6 Turning Off the Bluetooth Audio
- 6.14.7 Adjusting the Volume of the Radio from Bluetooth Audio Device
- 6.14.8 Clearing All Bluetooth Devices Information
- 6.14.9 Pairing with LEX Handheld
- 6.14.10 Responder Alert Sensors
- 6.15 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.16 Voice Announcement
- 6.17 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.18 Wi-Fi
- 6.19 Utilities
- 6.19.1 Using the Flip Display
- 6.19.2 Selecting a Basic Zone Bank
- 6.19.3 Selecting the Power Level
- 6.19.4 Controlling the Display Backlight
- 6.19.5 Locking and Unlocking the Controls
- 6.19.6 Turning Voice Mute On or Off
- 6.19.7 Using the Time-Out Timer
- 6.19.8 Conventional Squelch Operation
- 6.19.9 Using the PL Defeat Feature
- 6.19.10 Digital PTT ID Support
- 6.19.11 Smart PTT (Conventional Only)
- 6.19.12 Transmit Inhibit
- 6.19.13 Instant Recall
- Accessories
- Legal and Compliance Statement
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- Bluetooth
- Bluetooth Pairing
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- Control Channel
- Conventional
- Conventional Scan List
- COTS
- Cursor
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- Failsoft
- FCC
- Hang up
- IV&D
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- Li-Ion
- Man Down
- MCW
- MDC
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- NiMH
- Non-tactical/revert
- OCW
- Over-The-Air Rekeying
- Page
- Personality
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- Trunking
- Trunking Priority Monitor scan list
- USK
- VRS
- Zone
6.19.12.2
Disabling Transmit Inhibition
Procedure:
1 Press the Transmit Inhibit programmable button.
NOTICE: If the user has disabled TX Inhibit using the softkey and then moves the switch
to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit off. You hear a sequence of short, high-low tone (Transmit
Inhibit Off tone) to indicate that the transmission is back to normal operation.
6.19.13
Instant Recall
This feature allows you to save the last received call and playback the recorded call.
6.19.13.1
Saving and Playback Calls
When and where to use:
Procedure:
• Saving the recorded calls using the preprogrammed Record Playback button:
a. Long press the preprogrammed Record Playback button to save the recorded calls.
Radio displays Audio Saved momentarily.
Radio plays the saved call automatically if call saving is successful.
A tone sounds if call saving is not successful.
• Playback the saved calls using the preprogrammed Record Playback button:
a. Short press the preprogrammed Record Playback button to playback the saved calls.
b. Short press the preprogrammed Record Playback button again to skip to the next saved
call. If there is only a single saved call, the playback skips to the end of the call.
Radio auto playback the most recent incoming call followed by saved calls in chronological
order.
Radio displays the playback status.
NOTICE:
Received call overwrites the ongoing record playback. User can short press the
programmable button within three seconds to continue the playback and ignore the
receiving call.
User can short press the programmable button to trigger playback when the radio is
receiving call to overwrite the receiving call.
Playback can be halted by any tone and button press except for specific buttons. Check
with your dealer or system administrator for more information.
MN006727A01-AA
Advanced Features
75