User's Guide

6.18.2
Checking the Wi-Fi Configuration and Status of the Radio
Procedure:
Long press the preprogrammed Wi-Fi button.
The display shows the current status of the Wi-Fi as described next.
WF SRCHG
Looking for available Wi-Fi networks that have been preprogrammed into the radio.
WF CNTG
In the process of connecting to a found Wi-Fi network.
WF CNTD
Connected to one of the preprogrammed Wi-Fi networks.
NO SERVICE
No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator,
on the top display.
6.19
Utilities
This chapter explains the operations of the utility functions available in your radio.
6.19.1
Using the Flip Display
When and where to use: This feature allows you to flip the content of the top display upside down. It
is particularly useful when you would like to read the top display while the radio is still in the carry
holder attached to your belt.
Procedure:
To flip the display, press and hold the preprogrammed Light/Flip button.
6.19.2
Selecting a Basic Zone Bank
Prerequisites: The Basic Zone Select feature must to be preprogrammed to the 3-position A-B-C
switch, while the Basic Zone Bank feature must be preprogrammed to any side button or Top
(Orange) button before you can use this feature.
When and where to use: This feature allows twice as many zones to be accessed from a switch,
doubling the amount of switch positions.
Procedure:
1 Use the preprogrammed Basic Zone Bank button to toggle the position between Bank 1 and
Bank 2.
The top display shows the status icons (A, B, C, D, E, or F) or the zone name based on the bank
and switch position selected.
NOTICE: See the Basic Zone Bank 1 and Basic Zone Bank 2 icons for more information
on the status icons.
MN006727A01-AA
Advanced Features
70