User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 Advanced Call Features
- 6.2 Scan Lists
- 6.3 Scan
- 6.4 Call Alert Paging
- 6.5 Emergency Operation
- 6.5.1 Special Considerations for Emergency Operation
- 6.5.2 Emergency Keep-Alive
- 6.5.3 Exiting Emergency Operation
- 6.5.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.5.5 Sending an Emergency Alarm
- 6.5.6 Sending an Emergency Call (Trunking Only)
- 6.5.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.5.8 Sending an Emergency Alarm with Emergency Call
- 6.5.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.5.10 Sending a Silent Emergency Alarm
- 6.5.11 Emergency Find Me
- 6.6 Fireground
- 6.7 Tactical Public Safety (Conventional Only)
- 6.8 Man Down
- 6.9 Secure Operations
- 6.10 Radio Inhibit
- 6.11 Global Positioning System/Global Navigation Satellite System
- 6.12 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.13 Trunking System Controls
- 6.14 Mission Critical Wireless Bluetooth®
- 6.14.1 Turning On Bluetooth
- 6.14.2 Turning Off the Bluetooth
- 6.14.3 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature
- 6.14.4 Standard Pairing Feature
- 6.14.5 Turning On the Bluetooth Audio
- 6.14.6 Turning Off the Bluetooth Audio
- 6.14.7 Adjusting the Volume of the Radio from Bluetooth Audio Device
- 6.14.8 Clearing All Bluetooth Devices Information
- 6.14.9 Pairing with LEX Handheld
- 6.14.10 Responder Alert Sensors
- 6.15 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.16 Voice Announcement
- 6.17 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.18 Wi-Fi
- 6.19 Utilities
- 6.19.1 Using the Flip Display
- 6.19.2 Selecting a Basic Zone Bank
- 6.19.3 Selecting the Power Level
- 6.19.4 Controlling the Display Backlight
- 6.19.5 Locking and Unlocking the Controls
- 6.19.6 Turning Voice Mute On or Off
- 6.19.7 Using the Time-Out Timer
- 6.19.8 Conventional Squelch Operation
- 6.19.9 Using the PL Defeat Feature
- 6.19.10 Digital PTT ID Support
- 6.19.11 Smart PTT (Conventional Only)
- 6.19.12 Transmit Inhibit
- 6.19.13 Instant Recall
- Accessories
- Legal and Compliance Statement
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- Bluetooth
- Bluetooth Pairing
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- Control Channel
- Conventional
- Conventional Scan List
- COTS
- Cursor
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- Failsoft
- FCC
- Hang up
- IV&D
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- Li-Ion
- Man Down
- MCW
- MDC
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- NiMH
- Non-tactical/revert
- OCW
- Over-The-Air Rekeying
- Page
- Personality
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- Trunking
- Trunking Priority Monitor scan list
- USK
- VRS
- Zone
The radio only search for HSP devices and Motorola Solutions MCW & OCW accessories. Radio filters
out other profiles.
Procedure:
Press the preprogrammed Bluetooth Inquiry On/Off button, to enable the Bluetooth Search
feature.
One of the following scenarios occurs:
• If successful, the display shows SRCH ON followed by SRCH END when the radio is pairing
with a device found. The display shows <Device Name> PAIRED to indicate pairing is
complete.
• If the feature fails to initiate or the radio fails to pair with any device, the display shows SRCH
END when the search timer expires without pairing with any device. Repeat this step.
One of the following scenarios occurs:
• The radio continues to connect to the device. If the connecting process is successful, the radio
sounds an incremental-pitched tone. The display shows <Device Type>CONNCTED, and the
Bluetooth icon turns from b to a.
• If the device already has pairing records and the connecting process fails, the radio sounds a short,
low-pitched tone. The display shows <Device Type> CON FAIL.
• If the connection fails within 6 seconds, you hear a decremental-pitched tone to indicate that the
device is unpaired. The display shows <Device Type> UNPAIRED.
6.14.4.2
Turning On Bluetooth Visibility
When and where to use: Turning Bluetooth visibility on enables other Bluetooth devices to search for
your radio. The visibility of the Bluetooth is set to turn off by default.
Procedure:
• a. Press and hold the preprogrammed Bluetooth Inquiry On/ Off button for three seconds to
enable the Bluetooth visibility feature.
One of the following scenarios occurs:
• Keep holding the button although you hear a short, medium-pitched tone with the display
shows momentary VISIBLE. This indicates the visibility is turned on successfully.
1
• If the visibility fails to turn on, the display shows VISIBLTYFAILED.
• When the timer expires, the display shows VISI OFF.
6.14.4.3
Receiving Pairing Request from other Devices
Procedure:
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and pair with any request received from other
device.
1
Releasing the preprogrammed button turns off the Visibility mode.
MN006727A01-AA
Advanced Features
64