User's Guide

6.1.3.2
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Procedure:
Press the preprogrammed Reprogram Request button to send reprogram request to the
dispatcher.
The display shows RPGM and PLS WAIT.
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows
ACK RCVD and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-
pitched alert tone and the display shows NO ACK.
6.2
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group sequence specified in the scan list for the current channel/group.
Your radio supports different types of Scan Lists:
• Trunking Priority Monitor Scan List
• Conventional Scan List
• Talkgroup Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be preprogrammed in
your radio.
6.2.1
Intelligent Priority Scan
Intelligent Priority Scan feature allows you to add or delete conventional channels and trunking
talkgroups from multiple system into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, radio scans for higher priority
member within the same Trunking or Conventional system.
6.2.2
Viewing a Scan List
Procedure:
Turn the 16-Position Select Knob to view the members on the list.
6.2.3
Viewing and Changing the Priority Status
Procedure:
Press the Top Side (Select) button to change the priority status of the currently displayed
channel or the scan list status icon of the currently displayed channel.
The radio shows one of following priority status icons and scenarios:
MN006727A01-AA
Advanced Features
42