User's Guide
Table Of Contents
- Contents
- List of Tables
- Software Version
- Read Me First
- Preparing Your Radio for Use
- Radio Controls
- Status Indicators
- General Radio Operation
- Advanced Features
- 6.1 Advanced Call Features
- 6.2 Scan Lists
- 6.3 Scan
- 6.4 Call Alert Paging
- 6.5 Emergency Operation
- 6.5.1 Special Considerations for Emergency Operation
- 6.5.2 Emergency Keep-Alive
- 6.5.3 Exiting Emergency Operation
- 6.5.4 Exiting Emergency as Supervisor (Trunking Only)
- 6.5.5 Sending an Emergency Alarm
- 6.5.6 Sending an Emergency Call (Trunking Only)
- 6.5.7 Sending An Emergency Call With Hot Mic (Trunking Only)
- 6.5.8 Sending an Emergency Alarm with Emergency Call
- 6.5.9 Sending An Emergency Alarm and Call with Hot Mic
- 6.5.10 Sending a Silent Emergency Alarm
- 6.5.11 Emergency Find Me
- 6.6 Fireground
- 6.7 Tactical Public Safety (Conventional Only)
- 6.8 Man Down
- 6.9 Secure Operations
- 6.10 Radio Inhibit
- 6.11 Global Positioning System/Global Navigation Satellite System
- 6.12 Mission Critical Geofence (ASTRO 25 Trunking)
- 6.13 Trunking System Controls
- 6.14 Mission Critical Wireless Bluetooth®
- 6.14.1 Turning On Bluetooth
- 6.14.2 Turning Off the Bluetooth
- 6.14.3 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature
- 6.14.4 Standard Pairing Feature
- 6.14.5 Turning On the Bluetooth Audio
- 6.14.6 Turning Off the Bluetooth Audio
- 6.14.7 Adjusting the Volume of the Radio from Bluetooth Audio Device
- 6.14.8 Clearing All Bluetooth Devices Information
- 6.14.9 Pairing with LEX Handheld
- 6.14.10 Responder Alert Sensors
- 6.15 ASTRO 25 (P25) Programming Over Project 25 (POP25)
- 6.16 Voice Announcement
- 6.17 Site Selectable Alerts (ASTRO 25 Trunking)
- 6.18 Wi-Fi
- 6.19 Utilities
- 6.19.1 Using the Flip Display
- 6.19.2 Selecting a Basic Zone Bank
- 6.19.3 Selecting the Power Level
- 6.19.4 Controlling the Display Backlight
- 6.19.5 Locking and Unlocking the Controls
- 6.19.6 Turning Voice Mute On or Off
- 6.19.7 Using the Time-Out Timer
- 6.19.8 Conventional Squelch Operation
- 6.19.9 Using the PL Defeat Feature
- 6.19.10 Digital PTT ID Support
- 6.19.11 Smart PTT (Conventional Only)
- 6.19.12 Transmit Inhibit
- 6.19.13 Instant Recall
- Accessories
- Legal and Compliance Statement
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
- Glossary
- ACK
- Active Channel
- Analog Signal
- ARS
- ASTRO 25
- ASTRO conventional
- Autoscan
- Bluetooth
- Bluetooth Pairing
- Call Alert
- Carrier Squelch
- Central Controller
- Channel
- Control Channel
- Conventional
- Conventional Scan List
- COTS
- Cursor
- Digital Private Line (DPL)
- Digital Signal
- Dispatcher
- Digital Signal Processor
- Dynamic Regrouping
- Failsoft
- FCC
- Hang up
- IV&D
- Key Variable Loader
- Liquid-Crystal Display (LCD)
- Light Emitting Diode (LED)
- Li-Ion
- Man Down
- MCW
- MDC
- Monitor
- Multi-System Talkgroup Scan List
- Network Access Code
- NiMH
- Non-tactical/revert
- OCW
- Over-The-Air Rekeying
- Page
- Personality
- Preprogrammed
- Private (Conversation) Call
- Private Line (PL)
- Programmable
- Push-to-Talk
- Radio Frequency
- Repeater
- selective switch
- Squelch
- Synchronous Serial Interface (SSI)
- Standby
- Status Calls
- Tactical/non-revert
- TalkAround
- Talkgroup
- Trunking
- Trunking Priority Monitor scan list
- USK
- VRS
- Zone
You Hear Tone Name Heard
Gurgle Dynamic Regrouping (When PTT button is pressed) a dynamic ID has been
received.
Talk Permit (When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
Unique,
Low-Pitch-
ed Chirp
New Message When a new message is received.
Unique,
High-Pitch-
ed Chirp
Priority Status When a priority message is received.
Incremen-
tal- Pitched
Tone
Bluetooth Paired When Bluetooth accessory is paired with the radio.
Bluetooth Connected When Bluetooth accessory is connected to the radio.
Decremen-
tal- Pitched
Tone
Bluetooth Unpaired When Bluetooth accessory is unpaired from the radio.
Bluetooth Disconnect-
ed
When Bluetooth accessory is disconnected from the ra-
dio.
A Group of
Very High-
Pitched
Tones
Man Down Continu-
ous Tone
When radio is in Man Down mode and prepares to
transmit Emergency Alarm when the timer of this alarm
ends.
Critical Man Down
Continuous Tone
When radio is in Man Down Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
Unique
Low-High
Tone
Enhanced Zone Bank
Up
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
Unique
High-Low
Tone
Enhanced Zone Bank
Down
When EZB Down button is pressed to scroll the En-
hance Zone Bank down.
4.6
Display Color Change On Channel
This feature provides visual channel identification for users to have a quick visual recognition on a
particular channel.
Your radio must be preprogrammed to allow you to use this feature.
When changing channels, the radio backlight on top display and accessories (DRSM or keypad Mic)
changes to the preprogrammed color.
When changing channels, the radio backlight on top display and accessories (DRSM) changes to the
preprogrammed color.
The radio backlight on top display changes to white and if connected to accessories, the DRSM
backlight changes to white and the keypad mic backlight changes to green for the following scenarios:
The backlight on top display changes to white and if connected to DRSM, the DRSM backlight changes
to white for the following scenarios:
• When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels
MN006727A01-AA
Status Indicators
33