User's Guide

Call Response
Allows you to answer a private call.
Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for the Priority-One channel) to temporarily replace the
Priority-Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Man Down Clear
Clears the Man Down mode alarm that is triggered when your radio achieves or passes a tilt angle
threshold or a combination of the angle threshold and a motion sensitivity level.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels or the designated transmit
channel from the scan list.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Rekey Request
Notifies the dispatcher that a new encryption key is needed.
Repeater Access Button (RAB) (Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping assignment is needed.
Request-To-Talk (Conventional Only)
Notifies the dispatcher that you want to send a voice call.
Scan
Toggles scan on or off.
Scan List Programming
Selects the scan list for editing (by pressing and holding the Scan button).
Secure Transmission Select (Conventional and Trunking)
Toggles the Secure Transmission On or Off when the Secure/Clear Strapping field is set to Select
for the current channel and when the radio is model/option capable.
Site Display/Search (Trunking Only)
Displays the current site ID and RSSI value; performs site search for Automatic Multiple Site Select
(AMSS) or SmartZone operation.
Site Lock/Unlock (Trunking Only)
Locks onto a specific site.
Talkaround/Direct (Conventional Only)
Toggles between using a repeater or communicating directly with another radio.
Basic Zone Bank
Provides access from up to six zones by toggling between two banks of three zones, one group of
three (A, B, and C) to a second group of three zones (D, E, and F).
MN006727A01-AA
Radio Controls
25