User Manual

NOTICE:
If programmed, the Emergency Search tone
sounds. This tone is muted when the radio
transmits or receives voice, and stops when
the radio exits Emergency mode. The
Emergency Search tone can be programmed
by your dealer or system administrator.
2 Wait for acknowledgment.
If successful:
The Emergency tone sounds.
The green LED blinks.
The display shows Alarm Sent.
Your radio enters the Emergency call mode when
the display shows Emergency and the destination
group alias.
3 Press the PTT button to make the call.
The green LED lights up. The display shows the
Group Call icon.
4 Do one of the following:
Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
5 Release the PTT button to listen.
6
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
7 To exit the Emergency mode once the call ends,
press the Emergency Off button.
If you do not press the Emergency Off button to exit
the Emergency mode, the red LED blinks and the
radio stays in Emergency mode.
The radio returns to the Home screen.
English
88 Send Feedback