User Manual

automatically start on the last scanned active channel or

group, or on the channel where scan was initiated.

• Auto Scan (Automatic) : Your radio automatically

starts scanning when you select a channel or group that

has Auto Scan enabled.

Turning Scan On or Off

Follow the procedure to turn scan on or off on your radio.

1 Push the Channel Rocker to select a channel

programmed with Auto Scan enabled.

Press to access the menu.

Press

or to Scan. Press to select.

Press or to Scan State. Press to

select.

Press

or to the required scan state and

press to select.

If scan is enabled:

• The display shows

Scan On and Scan icon.

• The yellow LED blinks.

If scan is disabled:

• The display shows Scan Off.

• The Scan icon disappears.

• The LED turns off.

Responding to Transmissions During

Scanning

During scanning, your radio stops on a channel or group

where activity is detected. The radio stays on that channel

for a programmed duration known as hang time. Follow the

procedure to respond to transmissions during scanning.

If the Channel Free Indication feature is enabled,

you hear a short alert tone the moment the

transmitting radio releases the PTT button, indicating

the channel is free for you to respond. Press the PTT

button during hang time.

The green LED lights up.

2 Do one of the following:

English

Send Feedback 69