User Manual

Radio Check
This feature allows you to determine if another radio is
active in a system without disturbing the radio user. No
audible or visual notification is shown on the target radio.
This feature is only applicable for subscriber aliases or IDs.
Your radio must be programmed to allow you to use this
feature.
Sending Radio Checks
Follow the procedure to send radio checks on your radio.
1 Press the programmed Radio Check button.
2
Press or to the required alias or ID.
Press
to select.
The display shows a transitional mini notice,
indicating the request is in progress.The green LED
lights up.
Wait for acknowledgment.
If you press when the radio is waiting for
acknowledgment, a tone sounds, the radio terminates all
retries, and exits Radio Check mode.
The radio returns to the subscriber alias or ID screen.
Sending Radio Checks by Using the
Contacts List
Follow the procedure to send radio checks on your radio by
using the Contacts list.
1
Press to access the menu.
2
Press
or to Contacts. Press to
select.
3
Press or to the required alias or ID.
Press to select.
4
Press
or to Radio Check. Press
to select.
The green LED lights up.
English
Send Feedback 65