User Manual

Press or to Radio Settings. Press

to select.

Press or to Home Channel. Press

to select.

Press

or to the desired new home

channel alias. Press to select.

The display shows

beside the selected home

channel alias.

Remote Monitor

This feature is used to turn on the microphone of a target

radio with a subscriber alias or ID. You can use this feature

to remotely monitor any audible activity surrounding the

target radio.

Both your radio and the target radio must be programmed

to allow you to use this feature.

This feature stops after a programmed duration or when

there is any user operation on the target radio.

Initiating Remote Monitor

Follow the procedure to initiate Remote Monitor on your

radio.

1 Press the programmed Remote Monitor button.

Press

or to the required alias or ID.

Press to select.

The display shows a transitional mini notice,

indicating the request is in progress. The green LED

lights up.

4 Wait for acknowledgment.

If successful:

• A positive indicator tone sounds.

• The display shows a positive mini notice.

• The audio from the monitored radio starts playing

for a programmed duration, and the display

shows Rem. Monitor. Once the timer expires, an

alert tone sounds, and the LED turns off.

If unsuccessful:

English

62 Send Feedback