User Manual
Responding to Phone Calls as All Calls
When you receive a Phone Call as an All Call, you can
respond to or end the call, only if an All Call type is
assigned to the channel. Follow the procedure to respond
to Phone Calls as All Calls on your radio.
When you receive a Phone Call as an All Call:
• The display shows the Phone Call icon at the top right
corner.
• The display shows All Call and Phone Call.
If Phone Call capability is not enabled on your radio, the
first line of the display shows Unavailable and your radio
mutes the call.
Your radio returns to the previous screen when the call
ends.
1 Press the PTT button to respond to the call.
2 Release the PTT button to listen.
3
Press
to end the call.
The display shows Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows All Call and Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat step 3 or wait for the telephone
user to end the call.
Stopping Radio Calls
This feature allows you to stop an ongoing Group or Private
Call to free the channel for transmission. For example,
when a radio experiences a "stuck microphone" condition
where the PTT button is inadvertently pressed by the user.
Your radio must be programmed to allow you to use this
feature. Follow the procedure to stop calls on your radio.
1 Press the programmed Transmit Interrupt Remote
Dekey button.
2 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
If unsuccessful:
English
56 Send Feedback