User Manual

During channel access, press to dismiss the call
attempt. A tone sounds.
NOTICE:
The access or deaccess code cannot be more than
10 characters.
Check with your dealer or system administrator for
more information.
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Press the programmed One Touch Access button
to the predefined alias or ID.
If the entry for the One Touch Access button is
empty, a negative indicator tone sounds. If the
access code is not preconfigured in the Contact List,
the display shows Access Code:.
2
Enter the access code, and press
to proceed.
The green LED lights up. The display shows the
Phone Call icon at the top right corner. The first text
line shows the subscriber alias. The second text line
shows the call status.
If the call is successful:
The DTMF Tone sounds.
You hear the dialing tone of the telephone user.
If the call is unsuccessful:
A tone sounds.
The display shows Phone Call Failed and
then, Access Code:.
If the access code has been preconfigured in the
Contacts list, your radio returns to the screen you
were on before initiating the call.
3 Press the PTT button to respond to the call. Release
the PTT button to listen.
4
Press to end the call.
5 Do one of the following:
If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
De-Access Code:, and press
to proceed.
The radio returns to the previous screen.
English
52 Send Feedback