User Manual

6
The display shows Call Ended.
Responding to Selective Calls
Follow the procedure to respond to Selective Calls on your
radio.
When you receive a Selective Call:
The green LED blinks.
The first text line shows the Private Call icon and the
caller alias or Selective Call or Alert with Call.
Your radio unmutes and the incoming call sounds
through the speaker.
1 Press the PTT button to respond to the call.
The green LED lights up.
2 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period. A tone sounds. The display
shows Call Ended.
Phone Calls
A Phone Call is a call from an individual radio to a
telephone.
If Phone Call capability is not enabled in your radio:
The display shows Unavailable.
Your radio mutes the call.
Your radio returns to the previous screen when the call
ends.
During the Phone Call, your radio attempts to end the call
when:
You press the One Touch Access button with the
deaccess code preconfigured.
You enter the deaccess code as the input for extra
digits.
During channel access, access or deaccess code, or extra
digits transmission, your radio responds to the On/Off
button, Volume button, and the Channel Rocker only. A
tone sounds for every invalid input.
English
Send Feedback 51