User's Manual

Table Of Contents
7.2.14
Setting DTMF Tones
Procedure:
In the Call settings screen, tap on DTMF tones and set the DTMF tone length to Normal or
Long.
Return to Process
Call Management on page 62
7.2.15
Setting Call Forwarding
You can forward your incoming calls to a number in the contacts list or to a new number if your network
operator supports this service. The device can be set to redirect incoming calls to a specified number.
Procedure:
1 To access call forwarding settings, in Call Settings, tap Call forwarding.
2 Select one of the following call forwarding options:
If you want to forward all incoming calls to a predesignated number, select Always forward.
If you want to forward calls when your phone is busy, select Forward when busy.
If you want to forward calls when you do not answer incoming calls, select Forward when
unanswered.
If you want to forward calls when your phone is switched off or it is out of coverage area,
select Forward when unreachable.
3 Enter a specific number and tap Enable.
Return to Process
Call Management on page 62
7.2.16
Activating Call Waiting
When call waiting is enabled and the phone is in some other call, the new incoming call is displayed
and the user can switch to a new incoming call.
Procedure:
1 To activate call waiting, in the Call settings screen, tap Additional settings.
2 Enable Call waiting.
Return to Process
Call Management on page 62
7.2.17
Internet Calling
You can make and receive calls over Internet rather than over your cellular network. To place a call
over Internet, the device must be configured to use an Internet calling account.
CCCCCCCCCCC-A
Chapter 7: Contacts and Calls
68 Send Feedback