User's Manual

Table Of Contents
Return to Process
Security Settings on page 47
5.3
Locking Your Screen
Enabling Screen Lock on your device helps you protect data on your LEX F10.
Procedure:
1 Tap Screen lock and select one of the following options to configure lock screen:
None: Disables the screen lock.
Slide: When the screen is locked with the slide, slide your finger across the screen to unlock
it.
Pattern: Draw your pattern to set up the pattern lock. When the screen is locked with pattern,
provide the correct pattern to unlock it.
PIN: Provide your PIN value (minimum four numbers) to set up PIN lock. When the screen is
locked with PIN, provide your correct PIN value to unlock the screen.
Password: Provide your password to setup the password lock. When the screen is locked
with password, provide your correct password to unlock the screen.
NOTICE: When the screen is locked, you can answer an incoming call without unlocking
the screen.
a Touch the Center icon ( ) and slide over one of these icons:
Icons Description
Answer the call.
Reject the call.
Disconnect the call and respond with a de-
fault text message from a list of quick re-
sponse text messages.
2 The screen is locked automatically if you set the Automatically lock option.
3 For the screen to lock after you press the power button, enable Power button instantly locks.
4 To display specific owner info on the lock screen, enable Show Owner Info on lock screen in
Owner Info.
You can modify this whenever required.
Return to Process
Security Settings on page 47
5.4
Anti-Theft Protection
The anti-theft protection setting helps to protect your user data and user-affiliated data when your
device is stolen.
The anti-theft protection setting provides the following features for the authorized account users:
CCCCCCCCCCC-A
Chapter 5: Security Settings
48 Send Feedback