User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC and Industry Canada)
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- Emergency Operation
- Sending an Emergency Alarm
- Sending an Emergency Call (Trunking Only)
- Sending An Emergency Call With Hot Mic (Trunking Only)
- Sending an Emergency Alarm with Emergency Call
- Sending An Emergency Alarm and Call with Hot Mic
- Sending a Silent Emergency Alarm
- Change of Channels during Emergency
- Emergency Keep-Alive Feature
- Fireground
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Sending a Quick Text Message
- Priority Status and Request Reply of a New Text Message
- Appending a Priority Status to a Text Message
- Removing a Priority Status from a Text Message
- Appending a Request Reply to a Text Message
- Removing a Request Reply from a Text Message
- Appending a Priority Status and a Reply Request to a Text Message
- Removing a Priority Status and a Reply Request from a Text Message
- Receiving a Text Message
- Viewing a Text Message from the Inbox
- Replying to a Received Text Message
- Sent Text Messages
- Deleting a Text Message
- Deleting All Text Messages
- Secure Operations
- Global Positioning System/Global Navigation Satellite System
- GPS Operation
- GPS Performance Enhancement
- The Outdoor Location Feature (Using GPS)
- Military Grid Reference System (MGRS) Coordinates
- Accessing the Outdoor Location Feature
- Saving a Waypoint
- Viewing a Saved Waypoint
- Deleting a Single Saved Waypoint
- Deleting All Saved Waypoints
- Measuring the Distance and Bearing from a Saved Waypoint
- Location Feature in Emergency Mode
- Geofence (ASTRO 25 Trunking System)
- Trunking System Controls
- Bluetooth
- Turning On Bluetooth
- Turning Off the Bluetooth
- Re-Pair Timer
- Bluetooth Drop Timer
- Radio Indications of Lost Bluetooth Connection
- Standard Pairing Feature
- PIN Authentication in Pairing
- Turning On the Bluetooth Audio
- Turning Off the Bluetooth Audio
- Adjusting the Volume of the Radio from Bluetooth Audio Device
- Viewing and Clearing the Bluetooth Device Information
- Clearing All Bluetooth Devices Information
- Voice Announcement
- Site Selectable Alerts (ASTRO 25)
- Utilities
- Viewing Recent Calls
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Selecting the Audio Speaker
- Controlling the Display Backlight
- Locking and Unlocking the Controls
- Turning the Controls and Buttons Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Digital PTT ID Support
- Smart PTT Feature (Conventional Only)
- Transmit Inhibit
- IMPRES Battery Annunciator
- General Radio Information
- Helpful Tips
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Glossary
- Limited Warranty
sector are all can be configured to be seen at the
Commander’s command terminal.
If you have a critical situation, you can press the
Emergency button which activates an alarm on the Incident
Management Software at the command terminal.
The command terminal receives the following status
updates from your radio:
• Powering up or down the radio
• Automatic response to Polling
• Response to Evacuation commands
• Pressing the PTT button to make voice transmission
• Sending an Emergency Alarm and Call
• Entering or Exiting a Trunking Talkgroup
Entering Fireground Zone Channel
(Conventional)
1 Upon powering up, one of the following scenarios
occurs:
• If the Fireground Zone Channel is set as default,
you hear the gurgle tone and the radio displays
the home screen. You are in Fireground zone
channel.
• Get a qualified technician for assistance.
• If your home channel is not Fireground Zone
Channel, toggle or change the radio zone
channel to Fireground Zone Channel.
If you are entering Fireground Trunking Talkgroup,
upon powering up, ensure that the Fireground
Trunking Talkgroup is selected. The subscriber unit
automatically appears on the Incident Commander's
terminal.
2 Listen for a transmission. Adjust the Volume
Control Knob if necessary.
3 Perform one of the following actions:
• Press and hold the preprogrammed Volume Set
button to hear the volume set tone. Adjust the
Volume Control Knob if necessary. Release the
Volume Set button.
• At the desired Fireground zone and channel,
press the preprogrammed Monitor button and
listen for activity. Adjust the Volume Control
Knob if necessary.
English
Send Feedback 85