User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC and Industry Canada)
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- Emergency Operation
- Sending an Emergency Alarm
- Sending an Emergency Call (Trunking Only)
- Sending An Emergency Call With Hot Mic (Trunking Only)
- Sending an Emergency Alarm with Emergency Call
- Sending An Emergency Alarm and Call with Hot Mic
- Sending a Silent Emergency Alarm
- Change of Channels during Emergency
- Emergency Keep-Alive Feature
- Fireground
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Sending a Quick Text Message
- Priority Status and Request Reply of a New Text Message
- Appending a Priority Status to a Text Message
- Removing a Priority Status from a Text Message
- Appending a Request Reply to a Text Message
- Removing a Request Reply from a Text Message
- Appending a Priority Status and a Reply Request to a Text Message
- Removing a Priority Status and a Reply Request from a Text Message
- Receiving a Text Message
- Viewing a Text Message from the Inbox
- Replying to a Received Text Message
- Sent Text Messages
- Deleting a Text Message
- Deleting All Text Messages
- Secure Operations
- Global Positioning System/Global Navigation Satellite System
- GPS Operation
- GPS Performance Enhancement
- The Outdoor Location Feature (Using GPS)
- Military Grid Reference System (MGRS) Coordinates
- Accessing the Outdoor Location Feature
- Saving a Waypoint
- Viewing a Saved Waypoint
- Deleting a Single Saved Waypoint
- Deleting All Saved Waypoints
- Measuring the Distance and Bearing from a Saved Waypoint
- Location Feature in Emergency Mode
- Geofence (ASTRO 25 Trunking System)
- Trunking System Controls
- Bluetooth
- Turning On Bluetooth
- Turning Off the Bluetooth
- Re-Pair Timer
- Bluetooth Drop Timer
- Radio Indications of Lost Bluetooth Connection
- Standard Pairing Feature
- PIN Authentication in Pairing
- Turning On the Bluetooth Audio
- Turning Off the Bluetooth Audio
- Adjusting the Volume of the Radio from Bluetooth Audio Device
- Viewing and Clearing the Bluetooth Device Information
- Clearing All Bluetooth Devices Information
- Voice Announcement
- Site Selectable Alerts (ASTRO 25)
- Utilities
- Viewing Recent Calls
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Selecting the Audio Speaker
- Controlling the Display Backlight
- Locking and Unlocking the Controls
- Turning the Controls and Buttons Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Digital PTT ID Support
- Smart PTT Feature (Conventional Only)
- Transmit Inhibit
- IMPRES Battery Annunciator
- General Radio Information
- Helpful Tips
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Glossary
- Limited Warranty
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• or to the required ID.
3 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
4 Press and hold the PTT button to start the Selective
Call.
The display shows the ID of the target radio.
5 Release the PTT button to listen.
6
Press to return to the Home screen.
Talkgroup Call Feature (Conventional
Operation Only)
This feature allows you to define a group of conventional
system users so that they can share the use of a
conventional channel.
NOTICE:
Encryption keys are associated to talkgroups. When
talkgroups are associated, encryption keys are
changed by changing the active talkgroup. See
Secure Operations on page 98 for more
information.
Selecting a Talkgroup
1
or to Tgrp and press the Menu Select button
directly below Tgrp.
The display shows the last Talkgroup that was
selected and stored.
2 Perform one of the following actions:
• or to Preset for the preset
preprogrammed Talkgroup.
3 Press the Menu Select button directly below Sel to
save the currently selected Talkgroup and return to
the Home screen.
If the encryption key associated to the new
Talkgroup is erased, you hear a momentary key fail
tone and the display shows Key fail.
English
64 Send Feedback