User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC and Industry Canada)
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- Emergency Operation
- Sending an Emergency Alarm
- Sending an Emergency Call (Trunking Only)
- Sending An Emergency Call With Hot Mic (Trunking Only)
- Sending an Emergency Alarm with Emergency Call
- Sending An Emergency Alarm and Call with Hot Mic
- Sending a Silent Emergency Alarm
- Change of Channels during Emergency
- Emergency Keep-Alive Feature
- Fireground
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Sending a Quick Text Message
- Priority Status and Request Reply of a New Text Message
- Appending a Priority Status to a Text Message
- Removing a Priority Status from a Text Message
- Appending a Request Reply to a Text Message
- Removing a Request Reply from a Text Message
- Appending a Priority Status and a Reply Request to a Text Message
- Removing a Priority Status and a Reply Request from a Text Message
- Receiving a Text Message
- Viewing a Text Message from the Inbox
- Replying to a Received Text Message
- Sent Text Messages
- Deleting a Text Message
- Deleting All Text Messages
- Secure Operations
- Global Positioning System/Global Navigation Satellite System
- GPS Operation
- GPS Performance Enhancement
- The Outdoor Location Feature (Using GPS)
- Military Grid Reference System (MGRS) Coordinates
- Accessing the Outdoor Location Feature
- Saving a Waypoint
- Viewing a Saved Waypoint
- Deleting a Single Saved Waypoint
- Deleting All Saved Waypoints
- Measuring the Distance and Bearing from a Saved Waypoint
- Location Feature in Emergency Mode
- Geofence (ASTRO 25 Trunking System)
- Trunking System Controls
- Bluetooth
- Turning On Bluetooth
- Turning Off the Bluetooth
- Re-Pair Timer
- Bluetooth Drop Timer
- Radio Indications of Lost Bluetooth Connection
- Standard Pairing Feature
- PIN Authentication in Pairing
- Turning On the Bluetooth Audio
- Turning Off the Bluetooth Audio
- Adjusting the Volume of the Radio from Bluetooth Audio Device
- Viewing and Clearing the Bluetooth Device Information
- Clearing All Bluetooth Devices Information
- Voice Announcement
- Site Selectable Alerts (ASTRO 25)
- Utilities
- Viewing Recent Calls
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Selecting the Audio Speaker
- Controlling the Display Backlight
- Locking and Unlocking the Controls
- Turning the Controls and Buttons Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Digital PTT ID Support
- Smart PTT Feature (Conventional Only)
- Transmit Inhibit
- IMPRES Battery Annunciator
- General Radio Information
- Helpful Tips
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Glossary
- Limited Warranty
High
Enables the voice of the feature to announce even
when the radio is receiving calls.
Low
Disables the voice of the feature from announcing when
the radio is receiving calls.
You hear a voice announcement when the features below
are preprogrammed in the radio.
• The radio powers up. The radio announces the current
zone and channel it is transmitting.
• Press the preprogrammed voice announcement button
(which specifically programmed to playback the current
zone and channel). The radio announces the current
zone and channel it is transmitting.
NOTICE:
Pressing this preprogrammed playback button
enables the voice feature to announce in High
priority.
All the three programmable buttons at the side of
the radio support this feature.
• Change to a new zone. The radio announces the
current zone and channel it is transmitting.
• Change to a new channel remaining within the current
zone. The radio announces the current channel.
• Press either the Menu Select button or preprogrammed
button of the radio to launch or terminate Scan, PL
Disabled, Talkaround/Direct, or Transmit Inhibit. The
radio announces the corresponding feature activation or
deactivation.
Site Selectable Alerts (ASTRO 25)
A Site Selectable Alert (SSA) is an Intelligent Lighting
indicator together with audio alert sent to radios at a site or
a few sites to notify the users when there is a special
situation that they need to be aware of. Only authorized
radios are enabled to send SSA.
Upon the activation of a SSA, the receiving radios display
the alert alias and generate the periodic alert tone.
English
Send Feedback 127