User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC and Industry Canada)
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- Emergency Operation
- Sending an Emergency Alarm
- Sending an Emergency Call (Trunking Only)
- Sending An Emergency Call With Hot Mic (Trunking Only)
- Sending an Emergency Alarm with Emergency Call
- Sending An Emergency Alarm and Call with Hot Mic
- Sending a Silent Emergency Alarm
- Change of Channels during Emergency
- Emergency Keep-Alive Feature
- Fireground
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Accessing the Messaging Features
- Composing and Sending a New Text Message
- Sending a Quick Text Message
- Priority Status and Request Reply of a New Text Message
- Appending a Priority Status to a Text Message
- Removing a Priority Status from a Text Message
- Appending a Request Reply to a Text Message
- Removing a Request Reply from a Text Message
- Appending a Priority Status and a Reply Request to a Text Message
- Removing a Priority Status and a Reply Request from a Text Message
- Receiving a Text Message
- Viewing a Text Message from the Inbox
- Replying to a Received Text Message
- Accessing the Drafts Folder
- Sent Text Messages
- Deleting a Text Message
- Deleting All Text Messages
- ASTRO 25 Advanced Messaging Solution
- Secure Operations
- Security
- Global Positioning System/Global Navigation Satellite System
- GPS Operation
- GPS Performance Enhancement
- The Outdoor Location Feature (Using GPS)
- Military Grid Reference System (MGRS) Coordinates
- Accessing the Outdoor Location Feature
- Saving a Waypoint
- Viewing a Saved Waypoint
- Editing the Alias of a Waypoint
- Editing the Coordinates of a Waypoint
- Deleting a Single Saved Waypoint
- Deleting All Saved Waypoints
- Measuring the Distance and Bearing from a Saved Waypoint
- Location Feature in Emergency Mode
- Geofence (ASTRO 25 Trunking System)
- Trunking System Controls
- Bluetooth
- Turning On Bluetooth
- Turning Off the Bluetooth
- Re-Pair Timer
- Bluetooth Drop Timer
- Radio Indications of Lost Bluetooth Connection
- Standard Pairing Feature
- PIN Authentication in Pairing
- Turning On the Bluetooth Audio
- Turning Off the Bluetooth Audio
- Adjusting the Volume of the Radio from Bluetooth Audio Device
- Viewing and Clearing the Bluetooth Device Information
- Clearing All Bluetooth Devices Information
- Editing the Bluetooth Friendly Name
- Voice Announcement
- Site Selectable Alerts (ASTRO 25)
- Sending SSA Notification to Single Site
- Sending SSA Notification to Single Site by Manual Entry
- Sending SSA Notification to All Sites
- Sending SSA Notification to All Available Sites
- Stopping SSA Notification of a Single Site
- Stopping SSA Notification of a Single Site by Manual Entry
- Stopping SSA Notification of All Sites
- Stopping SSA Notification of All Available Sites
- Utilities
- Viewing Recent Calls
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Selecting the Audio Speaker
- Controlling the Display Backlight
- Locking and Unlocking the Keypad and Controls
- Turning the Controls and Keypad Buttons Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Digital PTT ID Support
- Smart PTT Feature (Conventional Only)
- Transmit Inhibit
- IMPRES Battery Annunciator
- General Radio Information
- Helpful Tips
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Glossary
- Limited Warranty
5 Press the Menu Select button directly below Logn
or Ok.
If only one-factor is enabled, the display shows 1F
logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login
failed. The display returns to User Login screen.
6 For radio enabled with two-factor login, enter your
passcode when you see a blinking cursor.
7 Press the Menu Select button directly below Logn.
The display shows In progress.
If the login fails, the display shows momentary 2F pscd
failed. Press the Menu Select button directly below Pscd
to re-enter passcode. If successful, the display shows User
Login screen with 2F logged in status to indicate Two-
Factor Authentication complete.
Logging out of Two-Factor Authentication
NOTICE:
Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The next
user is able to access the Inbox, Draft, and Sent
messages if private data is not deleted.
Radio that is successfully logged in to the secured
system receives advertisement from the server that
the access to the data for query is enabled.
1 Press the Menu Select button directly below Logt.
One of the following scenarios occurs:
• The display shows Clear private data?.
• If the Delete Messages On Session End feature
is enabled, the display shows momentary
Private data cleared.
2 Select Yes to clear all your private data or select No
to keep your private data.
If you select Yes, the display shows momentary
Private data cleared.
English
Send Feedback 119