User Manual

Even if other users are away from their radios, or if they are
unable to hear their radios, you can send them an
individual Call Alert page. You can also verify if a radio is
active on the system.
Depending on how your radio is programmed, when you
make an Enhanced Private Call, the radio either
automatically sends a call alert page if there is no answer
after the maximum ring time, or when you press the PTT
button.
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The call
received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See Making a Talkgroup Call on page 67 or Making a
Private Call (Trunking Only) on page 67 for more
information on returning the call.
Sending a Call Alert Page
Do one of the following to send a call alert page:
NOTICE:
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is
left idle long enough for the time to expire. You hear
the Menu Inactive Exit Tone upon feature exit.
• Sending a call alert page using the radio menu
Page:
a. or to Page.
b. Press the Menu Select button directly below
Page.
c. Press the Menu Select button directly below
Cnts to view the required ID, or to the
required ID, or use the keypad to enter the
required ID.
d. Press the PTT button to send the page.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you hear
a tone and the display shows Ack received. The
radio returns to the Home screen.
English
Send Feedback 91