User Manual
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC and Industry Canada)
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Contacts
- Scan Lists
- Scan
- Call Alert Paging
- Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- Emergency Operation
- Sending an Emergency Alarm
- Sending an Emergency Call (Trunking Only)
- Sending An Emergency Call With Hot Mic (Trunking Only)
- Sending an Emergency Alarm with Emergency Call
- Sending An Emergency Alarm and Call with Hot Mic
- Sending a Silent Emergency Alarm
- Change of Channels during Emergency
- Emergency Keep-Alive Feature
- Fireground
- Automatic Registration Service (ARS)
- Text Messaging Service (TMS)
- Accessing the Messaging Features
- Composing and Sending a New Text Message
- Sending a Quick Text Message
- Priority Status and Request Reply of a New Text Message
- Appending a Priority Status to a Text Message
- Removing a Priority Status from a Text Message
- Appending a Request Reply to a Text Message
- Removing a Request Reply from a Text Message
- Appending a Priority Status and a Reply Request to a Text Message
- Removing a Priority Status and a Reply Request from a Text Message
- Receiving a Text Message
- Viewing a Text Message from the Inbox
- Replying to a Received Text Message
- Accessing the Drafts Folder
- Sent Text Messages
- Deleting a Text Message
- Deleting All Text Messages
- ASTRO 25 Advanced Messaging Solution
- Secure Operations
- Security
- Global Positioning System/Global Navigation Satellite System
- GPS Operation
- GPS Performance Enhancement
- The Outdoor Location Feature (Using GPS)
- Military Grid Reference System (MGRS) Coordinates
- Accessing the Outdoor Location Feature
- Saving a Waypoint
- Viewing a Saved Waypoint
- Editing the Alias of a Waypoint
- Editing the Coordinates of a Waypoint
- Deleting a Single Saved Waypoint
- Deleting All Saved Waypoints
- Measuring the Distance and Bearing from a Saved Waypoint
- Location Feature in Emergency Mode
- Geofence (ASTRO 25 Trunking System)
- Trunking System Controls
- Bluetooth
- Turning On Bluetooth
- Turning Off the Bluetooth
- Re-Pair Timer
- Bluetooth Drop Timer
- Radio Indications of Lost Bluetooth Connection
- Standard Pairing Feature
- PIN Authentication in Pairing
- Turning On the Bluetooth Audio
- Turning Off the Bluetooth Audio
- Adjusting the Volume of the Radio from Bluetooth Audio Device
- Viewing and Clearing the Bluetooth Device Information
- Clearing All Bluetooth Devices Information
- Editing the Bluetooth Friendly Name
- Voice Announcement
- Site Selectable Alerts (ASTRO 25)
- Sending SSA Notification to Single Site
- Sending SSA Notification to Single Site by Manual Entry
- Sending SSA Notification to All Sites
- Sending SSA Notification to All Available Sites
- Stopping SSA Notification of a Single Site
- Stopping SSA Notification of a Single Site by Manual Entry
- Stopping SSA Notification of All Sites
- Stopping SSA Notification of All Available Sites
- Utilities
- Viewing Recent Calls
- Selecting the Power Level
- Selecting a Radio Profile
- Enabling and Disabling the Radio Alias
- Selecting the Audio Speaker
- Controlling the Display Backlight
- Locking and Unlocking the Keypad and Controls
- Turning the Controls and Keypad Buttons Tones On or Off
- Turning Voice Mute On or Off
- Using the Time-Out Timer
- Using Conventional Squelch Operation Features
- Using the PL Defeat Feature
- Digital PTT ID Support
- Smart PTT Feature (Conventional Only)
- Transmit Inhibit
- IMPRES Battery Annunciator
- General Radio Information
- Helpful Tips
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Glossary
- Limited Warranty
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
5 When your call is answered, press and hold the PTT
button to talk. Release the PTT button to listen.
6
Press to return to the Home screen.
See Phone Call Displays and Alerts on page 58 for more
information if your call is not answered.
Switching Between Repeater or
Direct Operation Button
The Repeater Operation increases the radio coverage area
by connecting with other radios through a repeater. The
transmit and receive frequencies are different.
The Direct or “talkaround operation” allows you to bypass
the repeater and connect directly to another radio. The
transmit and receive frequencies are the same.
Perform one of the following actions:
• Press the preprogrammed Repeater/Direct
switch to toggle between talkaround and repeater
modes.
• or to Dir and press the Menu Select button
directly below Dir.
The display shows Repeater mode if the radio is currently
in Repeater mode.
The display shows Direct mode and the Talkaround icon if
the radio is currently in Direct mode (during conventional
operation only).
Monitor Feature
The monitor feature is used to make sure that a channel is
clear before transmitting.
The lack of static on a digital channel when the users
switch from analog to digital radios is not an indication that
the radio is malfunctioning.
Digital technology quiets the transmission by removing the
noise from the signal and allows only the clear voice or
data information to be heard.
English
70 Send Feedback