User Manual

Table Of Contents
If the radio fails to get a location fix, the display
shows No service and returns to the previous
display.
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the Back
button.
Saving a Waypoint
Ensure that your radio shows the current location on the
screen.
1 Press the Menu Select button directly below Optn.
2 Perform one of the following actions:
or to Save as Waypt and press the
Menu Select button directly below Sel.
or to Save as Home and press the
Menu Select button directly below Sel and
proceed to step 5.
or to Save as Dest. and press the Menu
Select button directly below Sel and proceed to
step 5.
A blinking cursor appears on the screen.
3 Use the keypad to edit the auto-generated waypoint,
if required, or press the Back button to return to the
Location main screen.
4 Press the Menu Select button directly below Ok
once you are done.
One of the following scenarios occur:
The display shows Current loc saved as
<Waypoint name>.
The display shows Current loc saved as
[Home].
The display shows Current loc saved as
[Destination].
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the Back
button.
English
Send Feedback 133