User's Manual
Table Of Contents
- Droits d’auteur relatifs aux logiciels
- Normes de sécurité relatives à l’exposition aux radiofréquences
- Informations sur l’obtention de permis au Canada
- Introduction
- Schéma synoptique de la radio
- Caractéristiques de la batterie et du chargeur
- Information en matière de sécurité sur les batteries et les chargeurs
- Programmation de la radio au moyen du LP
- Clonage de radio
- Configuration avancée de la radio (*)
- Dépannage
- Utilisation et entretien
- Tableaux de radiofréquences et de codes
- Garantie limitée Motorola pour les États-Unis et le Canada
- Accessoires
- Blank Page
RADIO CLONING
English
24
RADIO CLONING
CLONING RADIO SETTINGS
You can copy the CLP Series radio settings from
one radio (the source) to a second radio using the
CLP Series Single Unit Charger (SUC) Kit P/N
HKPN4008 and CLP Series Cloning Cable Kit
P/N HKKN4026 (optional accessory) or CLP
Series Multi-Unit Charger (MUC) Kit
P/N HKPN4007 (optional accessory).
A multi-channel radio can be cloned to a single-
channel radio BUT only the first channel is cloned.
The Multi-Unit Charger (MUC) does not have to be
plugged in for cloning, but both radios require
charged batteries.
CLONING INSTRUCTIONS
Cloning Radios using the CLP Series
Cloning Cable Kit P/N HKKN4026 (optional
accessory)
Source Radio: Radio to be cloned
Target Radio: Radio to which the configuration
of the “Source Radio” will be
copied.
Before beginning the cloning process, make
sure you have:
• A fully charged battery on each one of the
radios
• Two CLP Series Single Unit Charger (SUC) Kits
• Both radios are turned OFF
1. Unplug any cables (power supply or USB
cables) from the Single Unit Chargers.
Cloning the Radio through a Single
Unit Charger