User's Manual
Table Of Contents
- Droits d’auteur relatifs aux logiciels
- Normes de sécurité relatives à l’exposition aux radiofréquences
- Informations sur l’obtention de permis au Canada
- Introduction
- Schéma synoptique de la radio
- Caractéristiques de la batterie et du chargeur
- Information en matière de sécurité sur les batteries et les chargeurs
- Programmation de la radio au moyen du LP
- Clonage de radio
- Configuration avancée de la radio (*)
- Dépannage
- Utilisation et entretien
- Tableaux de radiofréquences et de codes
- Garantie limitée Motorola pour les États-Unis et le Canada
- Accessoires
- Blank Page
RADIO OVERVIEW
English
8
OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature may
not be available on certain previous shipping models. At any time in Menu mode, short press PTT or
wait 3 seconds to exit the menu.
HOW TO... STEP 1 STEP 2
Change Channel
Press Menu button to navigate to
Channel.
Press +/- button to change
channel.
Enter Monitor Mode
Press Menu button to navigate to
Monitor.
Press +/- button to activate
or deactivate Monitor.
Enter Scan Mode
Press Menu button to navigate to
Scan.
Press +/- button to activate
or deactivate Scan.
Send Call Tone (enabled
through CPS)
Press Menu button to navigate to
Call Tone.
Press +/- button to send
Call Tone.
Quick Tip: It is not necessary to wait for the voice prompt to be completed before continuing with next button
press.
Note: For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models
support Scan Mode when the user enables “Dynamic Talkaround Scan” on a repeater channel via the
customer programming software.