User Manual

Your radio may be programmed to perform a
radio presence check prior to setting up the
Private Call. If the target radio is not available,
you hear a short tone and see negative mini
notice on the display.
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3 Key in the first character of the required alias.
A blinking cursor appears.
4 Use the keypad to type the required alias.
Press to move one space to the left. Press to
move one space to the right. Press the key
to delete any unwanted characters. Long press
to change text entry method.
The first line of the display shows the characters
you keyed in. The next lines of the display show
the short listed search results. The alias search is
case-insensitive. If there are two or more entries
with the same name, the radio displays the entry
that is listed first in the Contacts list.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 Press the PTT button to make the call.
The LED lights up solid green. The display shows
the destination alias.
7 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
8 Release the PTT button to listen.
When the target radio responds, the LED blinks
green, the radio unmutes and the response
sounds through the radio’s speaker
.
9 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
If there is no voice activity for a predetermined
period of time, the call ends.
The display shows Call Ended.
Advanced Features in Non-Connect Plus Mode
81
English