User Manual

• A programmable button – This method is for
Phone Calls only (see Making a Phone Call with
the Programmable Phone Button on page 58).
• The Contacts list (see Contact Settings
on page
75).
• Manual Dial – This method is for Private and
Phone Calls only and is dialed using the keypad
(see Making a Private Call from Contacts on page
77, and Making a Call with the Programmable
Manual Dial Button on page 60).
Note:
Your radio must have the Privacy feature
enabled on the channel to send a privacy-
enabled transmission. Only target radios with
the same Privacy Key OR the same Key Value
and Key ID as your radio will be able to
unscramble the transmission.
Note:
See Privacy on page 121 for more
information.
Making a Group Call
To make a call to a group of users, your radio must
be configured as part of that group.
1 Do one of the following.
• Select the channel with the active group alias
or ID. See Selecting a Channel on page
47.
• Press the programmed One Touch Access
button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call
icon appears in the top right corner. The first text
line shows the group call alias.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green
, the radio unmutes and the response
sounds through the radio’s speaker. You see the
Group Call icon, the group alias or ID, and
transmitting radio alias or ID on your display.
6 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
Making and Receiving Calls in Non-Connect Plus Mode
52
English