User Manual

Radio
Control
Steps
Program-
med Ra-
dio Check
button
1 Press the programmed Radio
Check button.
2
or to the required sub-
scriber alias or ID and press
to select.
Menu
1
to access the menu.
2
or to Contacts and press
to select.
3
or to the required sub-
scriber alias or ID and press
to select.
4
or to Radio Check and
press to select.
The display shows the Target Alias, indicating the
request is in progress. The LED lights up solid
green.
2 Wait for acknowledgement.
If the target radio is active in the system, a tone
sounds and the display briefly shows Target
Radio Available.
If the target radio is not active in the system, a
tone sounds and the display briefly shows Target
Radio Not Available.
Radio returns to the subscriber alias or ID screen
when initiated via Menu.
Radio returns to the Home Screen if initiated via
the programmable button.
Remote Monitor
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or IDs
only). The green LED will blink once on the target
subscriber. You can use this feature to monitor,
remotely, any audible activity surrounding the target
radio.
Your radio must be programmed to allow you to use
this feature.
Advanced Features in Connect Plus Mode
199
English